2025-2026 L3HSDC 3D Print Form

L3HSDC 3D Print Form

Please use this form to submit .stl files to be printed at the L3HSDC. Refresh the page if you encounter any issues. Please contact l3hsdcprintfarm@gmail.com if you have any questions regarding your print.
Name*

First NameLast Name
Phone Number*

Area CodePhone Number
Email*
FIT Email (Do NOT use personal email - your request will be DENIED)
Type of Project*

A - Senior DesignB - Faculty/ResearchC - Class ProjectD - Student Organization ProjectE - Personal
Student org Name:
Description of Project*
Printer Settings*

Default - Printer, material, and print settings will be chosen by staffCustom - User will select printer type, materials, and settings below
Custom Print Settings
FDM (Fused Deposition Modeling) - For General 3D Printing

Our Printers (Print Volume):

Prusa i3 MK3S+ (250mm x 210mm x 210mm)
Prusa Mini (180mm x 180mm x 180mm)
Bambu A1 (256mm x 256mm x 250mm)
Bambu X1C (256mm x 256mm x 250mm)
Bambu H2D (300mm x 320mm x 325mm)*
Markforged Mark II (CFR Printing Compatiable) (320 mm x 132 mm x 154 mm)*

*Requires L3HSDC Approval

Materials Provided:

PLA, PETG are available for everyone.
Bambu Lab PA6-CF, Markforged Onyx. By request for Senior Design and Research
ABS, Lightweight/Aero Materials are prohibited.
*Other Materials are available but may need to be provided. (contact L3HSDC staff)

Materials Technical Data Sheets:

Overture PLA
Overture PETG
Bambu Lab PA6-CF
Markforged Onyx

SLA (Stereolithography) - For High Detail Printing

Our Printers (Print Volume):

Elegoo Saturn 2 (8K resolution) (219mm x 123mm x 250mm)
Elegoo Saturn 4 Ultra (14K resolution) (219mm x 123mm x 220mm)

Materials Provided:

Sunlu Standard Resin
Sunlu ABS Like Resin
*Other Resins are available but may need to be provided. (contact L3HSDC staff)

Materials Technical Data Sheets:

  Sunlu Standard Resin
  Sunlu ABS Like Resin
Select 3D Printer:*
Print Materials:*

PLAPETGPA6-CFONYXOther
Print Materials:*

PLAPETGOther
Select Print Material: Resin*

8K ResinABS Like ResinSpecific Resin Needed (Please Contact L3HSDC staff)
Colors Available: *
*NOTICE: Some filament may not have alternative colors*
Colors Available: Resin*
*NOTICE: color preference not guaranteed unless filament is provided*
Quantity*
*NOTICE: Prints requiring expensive/excessive material may incur a cost to print*
Specify Print Settings, if any
Please add any information about type of infill, supports, or special requirements for your print
*NOTE*: PLEASE ensure your .stl file is exported correctly with proper dimensions

Please ensure that the file is exported in mm dimensions instead of inches. Circular features may not print correctly (they will show as low-poly), so please check your files before uploading. L3HSDC staff may deny a print request or reach out after submission if a print cannot be completed as submitted.
I have checked my .stl file before submitting to ensure the resolution and proper dimensions

Yes
Upload .stl Files for Printing (use mm)*

Upload Files
1 File Submission Only Cancelof
Additional Information or Comments
"I understand that I am expected to check the tracking form in order to know when my print is ready for pickup, and that an email will be sent out when my print is complete. I understand that my print will be discarded if not picked up within 2 weeks after the part complete email is sent."

The tracking form can be found here, as well as the "L3Harris Student Design Center" page of the Florida Tech website. (Check spam folder for the "part completed" email as well.)
Please read the updated terms above
Signature:*
agrees to the statement above
Should be Empty:

L3HSDC 3D Print Form

Custom Print Settings

*NOTE*: PLEASE ensure your .stl file is exported correctly with proper dimensions

NOTE: PLEASE ensure your .stl file is exported correctly with proper dimensions